Will Proper Auto Maintenance at Matt Davis Auto Really Save Gas?

Have you ever thought about all the little things we do to keep our lives running smoothly - like vacuuming? It makes a room feel fresher and more comfortable. We may not consider that we're also prolonging the life of the carpet by keeping it clean. But Garner drivers don't always extend those good habits into the garage. Our vehicles need regular maintenance just like our rugs need vacuuming. We may not notice a difference in the feel or appearance of the vehicle, but just as cleaning a carpet carries the hidden reward of prolonging its life, maintaining our vehicles incurs a hidden reward that becomes noticeable at Garner gas stations.

When it comes to reduced fuel economy, there are two culprits: increased friction and inefficient fuel combustion. That means that anything Garner drivers can do to decrease friction and increase the efficiency of their engines will translate to savings on fuel. Friction increases the amount of energy it takes to move something. So if we can reduce friction, we can decrease the amount of fuel it takes to run our vehicles. Engine oil is usually at the heart of friction problems in an engine. Too little oil means parts are not getting lubricated, which increases friction; dirty oil doesn't lubricate as well as clean oil. So one secret to good fuel efficiency is to stay on top of oil changes. Don't skip them and don't procrastinate. The same auto advice applies to transmission fluid. Keep it full and keep it clean, and your vehicle will run with less friction and better fuel economy.

If your tires are underinflated, it increases the friction between the tire and the road. Again, there is increased drag, and it takes more fuel to move your vehicle. Garner drivers should check their tire pressure every month and keep their tires properly inflated.

Alignment and brake problems can also increase friction. Besides saving fuel, keeping these systems in good repair has the added benefit of saving you on tires and brake pads. These items wear out more quickly when the alignment is off or when the brake system isn't in good working order. Talk to your friendly and knowledgeable service advisor at Matt Davis Auto.

The second culprit that stealthily steals our gas is inefficient fuel combustion. It depends on the engine getting the right amount of clean fuel to the right place with the right pressure at the right time in the right pattern. The key to peak engine performance is to keep the fuel system clean. Varnish and gum can build up in a fuel system, which will interfere with the fuel injectors. The fuel injectors are responsible for all those “rights” we spoke of. If they're dirty, amounts, timing, pressure and spray patterns can all get out of whack. The result? Reduced fuel efficiency. A fuel system cleaning at Matt Davis Auto in Garner can get your injectors back on track, improving performance and efficiency.

There are a few other maintenance items that can improve your fuel economy. One is to replace your PCV valve when it gets sticky. This valve allows unburned fuel in your engine exhaust to return to the engine. Garner drivers can also replace worn spark plugs and dirty fuel filters. A well-maintained vehicle will require fewer repairs and save at Garner gas pumps.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Staying In Charge (Alternator Repair)

Seems like these days, we're hearing about more and more electric or hybrid vehicles.  Keep in mind that conventional gasoline internal combustion vehicles have important electrical components, too, and it's important to make sure they're operating at their peak.

In a vehicle with a gasoline engine, the part that keeps the battery charged is the alternator.  It converts the mechanical energy created by the engine into electrical power.  To do that, a shaft in the alternator has a pulley on one end that's driven by a belt that is turned by the engine.  A series of magnets then spins around coiled wires and it creates alternating current, or electricity. Your vehicle uses that to charge the battery that, in turn, keeps other electrical components in your vehicle working.

Here are a few signs that the alternator isn't doing its job right.  The battery keeps going dead, your instrument panel's battery light is on (it looks like a rectangle with a - and + inside and a couple of "terminals" on top), or your lights are dimmer than they usually are. You may also have a voltage gauge that shows  lower than usual power. If bearings in your alternator are seizing up, you may hear a grinding noise coming from your engine compartment. If you have any of those signs, bring your vehicle to us so we can check your electrical system.

A technician will run diagnostics on your alternator, the cables and the battery. Because the alternator is driven by a belt, the technician will check what shape all the drive belts are in.  Plus, we'll see how much electricity the alternator is putting out. 

If your alternator has failed, it can be replaced with a new or a remanufactured one. Speak with your service advisor about which will best suit your needs. Oh, and keep in mind that sometimes other parts may have to be replaced at the same time. For example, if your alternator's bearings froze up, that may have damaged the drive belt, and it may have to be replaced at the same time. 

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Steering You Right (Power Steering Fluid Service)

It’s important for safe driving that two of the most important systems in your vehicle work right.  One is the brakes.  The other is the steering.  Nearly all vehicles on the road have some sort of power steering that allows you to direct a very heavy machine with little effort. 

There are two types, hydraulic and electric.  Many newer vehicles have electric power steering that uses an electric motor to make your steering easier.  But there are many vehicles on the road that use a system that has been around for years.  It uses a power steering pump, a cylinder, several valves, and hydraulic fluid to make it easy for you to turn the wheel. 

If you have hydraulic power steering in your vehicle, it’s important to change your power steering fluid every once in a while.  Over time, the fluid gets contaminated with dirt and other particles.  You might notice your steering is loose, maybe harder to turn and makes a low, straining noise. The first step in determining hydraulic power steering problems is to have your fluid checked.  Its color and smell can give a technician clues to any problems. They will recommend changing it if it has signs of being old, such as the wrong color or smell. 

Because steering is such a vital safety feature in your vehicle, the best strategy is to maintain your power steering according to the vehicle manufacturer’s recommendations.  That means periodically, the fluid should be changed.  That will prolong the life of the other steering systems components, such as hoses, seals, valves, and the power steering pump.  During this service, the technician will replace the fluid, bleed the system and check for leaks.  You’ll be back on the road knowing your vehicle is in top shape to steer you right.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

A Turn for the Worse (Using Turn Signals)

Distracted driving is bad, you know that.  Daydreaming, talking on the cell phone, putting your makeup on in the rear view mirror.  All bad.  But there's something else that causes more than twice as many accidents, according to a recent study.  And that's people who don't use their turn signals. 

Maybe you're one of them.  One survey said nearly a quarter of drivers were just too lazy to use their turn signals.  Others said they didn't use them because they weren't really necessary.  Traffic laws may dictate otherwise, but statistics show police don't write that many tickets for turn signal violations. 

You may have encountered the driver who cuts into your lane without signaling a change.  Often, that person does it deliberately to catch you off guard so you won't invade his or her space.  And when it comes to young drivers using turn signals, one insurance company survey showed more than two-thirds of those they talked to admitted it wasn't their regular practice.

Knowing that, you may wonder why you should use your turn signal.  The reason is simple.  It lets other drivers know what you plan to do.  Driving it tricky enough with all the moving parts on the road.  The more you know what other people are doing, the more you can prepare for that with the way you drive.

How many times have you seen someone turn left without putting their turn signal on?  That's a leading cause of rear-end accidents. Not only does using your turn signal promote safety, it also shows courtesy to other drivers.

There are some drivers who don't use turn signals because their turn signals don't work.  What a lousy excuse! All of the safety equipment in your vehicle should be working; if it isn't, head over to your repair facility.  Often it's as simple as a burned out bulb or a broken wire. 

Finally, the number one reported reason for not using a turn signal is that drivers just forget to do it.  (And the ones who DO use their turn signals and forget they're on?  We won't even go there.)

Engineers put turn signals on vehicles for a reason.  They help drivers communicate with other drivers.  Using them could save accidents… and lives.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com