AUTONET TV

Beware of Potholes! (Avoiding Pothole Damage)

You may live in a region where roads become pockmarked with craters known better as potholes.  They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road.  And when your vehicle hits one of those holes that's big enough, the impact can flatten a tire, bend a wheel or tear apart a suspension component. 

To minimize pothole damage, leave enough room between you and the vehicle in front of you so you can see the road surface and any upcoming potholes.  That way you'll have time to slow down and steer around them.  Also, if you see what looks like a puddle of water, it may be hiding a pothole underneath, so treat it as if was a pothole.

If you keep your tires inflated to the manufacturer's specifications, they're more likely to withstand hard impacts.  And the slower you're going when you hit a pothole, the less likely you are to break something.   But if you do find you've hit a pothole pretty hard, here are some signs to watch out that could signal damage.

• Your vehicle pulls to one side
• The steering wheel shakes
• You hear noises or clunks coming from your suspension
• Your steering wheel is not centered when you are going straight

These are all symptoms you should have checked at your vehicle repair facility as soon as you can. The longer you wait, the more damage you may be doing.

You also may find after hitting a pothole hard that the tire on that wheel is flat. Try not to drive any more on that tire since you could do a lot more damage to the tire and/or wheel. A call to roadside assistance may save you money in the long run by limiting the damage to what's already done.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

STRAIGHT TALK ABOUT STEERING (Loose Steering)

Perhaps you've heard someone use the term "loose steering." And it's pretty much what it sounds like.  You turn the steering wheel and the vehicle's wheels don't seem to go exactly where you thought you were pointing them.  You have to constantly make steering adjustments. 

Loose steering is sloppy steering, and it can be a safety hazard.  You need to be able to control your vehicle with pretty much the same precision as the way it was when it came off the assembly line.  

If the steering in your vehicle is starting to feel loose and sloppy, there may be some significant suspension issues that need examining by a trained technician.

How do you know if your vehicle needs to be looked at? Try turning the steering wheel and see how much play is in it.  One rule of thumb: if you can turn it the distance of a quarter and a dime placed side by side without seeing the outside wheels move, it's time to have it inspected by one of our technicians.

Our Matt Davis Auto technician will examine those components that are supposed to work together to make sure your steering is tight and precise.  They are linked together by things called (of course) linkages.

When these linkage components were new, they all fit together tightly and moved together to make sure your wheels responded quickly and precisely to your movements of the steering wheel.   

But hit a few potholes, travel over a couple of rough railroad tracks and those metal components can be damaged or bent.  Given enough time, they will simply wear out. Our trained Matt Davis Auto technician can inspect all of those parts and determine what needs to be repaired and/or replaced.  

Keep your steering tight.  Loose or sloppy steering can be dangerous.  Thank goodness it usually warns you in plenty of time before it fails completely. Just straight talk… about steering.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Winter Watch List (Winter Maintenance Items)

Don't love winter weather? Here's a list of four things you need to keep a watch on during the winter months.

Let's start with coolant levels.  Coolant is as important in cold weather as it is in hot weather.  Think of the term "anti-freeze." Your coolant needs to be adjusted for climate and temperature so the coolant doesn't freeze when the vehicle isn't running. Your service facility will know the right mixture.

Next, windshield wiper fluid. Winter weather can be challenging when it comes to visibility, so it's important to have the correct windshield washer fluid.  Some of it is specially formulated for ice and freezing temperatures. And it won't freeze if your vehicle has to sit out in below-freezing temperatures.  And don't forget you can get winter wiper blades that stay clearer in snowy, icy weather than ordinary blades.

Don't forget your tire pressure and tread.  After all, tires are what connect your vehicle and the road.  As temperatures go down, so does the air pressure inside your tires, so it's important to keep that up to the manufacturer's recommended pressure.  Also, make sure your tires have enough tread so they can grip slippery roads. Any service facility can perform a simple test so you'll know. If you need some new tires, they can help you find those that will fit your driving patterns.

Finally, oil gets thicker when the temperatures go down, so it's important to have the proper viscosity for your climate.  Consult your service advisor who will make sure your vehicle is using what the manufacturer recommends.

Keep your vehicle prepared for winter weather and it will reward you with the safety and performance it's designed for.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Heat and your Tires (Tire Pressure Monitoring System)

With hotter weather and brutal heat waves becoming more common, the pressure in your vehicle's tires goes up.  After all, heat causes air to expand, and the air in your tires follows the laws of physics. Overinflated tires can reduce your vehicle's traction, cause a hard, punishing ride and make your tires wear out faster; all are important safety issues.

Four out of every ten drivers rarely check tire pressure. Some rely on their vehicle's tire pressure monitoring system (TPMS) to keep an eye on proper tire inflation.  But it's not designed to do that.

TPMS is a safety feature that has been required on vehicles made in 2008 or later, using sensors in the wheels that alert you to tire pressure problems.  That warning can be a light on your dash, a digital message or a readout of the pressure in each individual wheel.  But a study showed that more than 40 percent of drivers don't even know what the tire pressure monitoring light symbol looks like!

One looks like a horseshoe with an exclamation point in the middle.  The other looks like an overhead view of your vehicle with the tires at all four corners.  They may even show the inflation number (usually in pounds per square inch, or PSI).

The TPMS is designed to alert you that your tires aren't inflated within certain parameters, but the system shouldn't be a substitute for frequently having your tires checked with a tire gauge.  A TPMS light is only required to come on when a tire is 25 percent under the recommended tire pressure; by that time, you're driving on an unsafe tire and causing excessive wear.

Have your vehicle checked regularly by our professionals, and that includes tire pressure checks.  If you do see the tire pressure warning come on, have our service center look at it soon.  You may have a tire with a problem or the TPMS system may not be working right. 

Either way, since your tires are the only contact your vehicle has with the road, your safety depends a great deal on your tires being in top shape and correctly inflated.  Keep your tires properly inflated and your TPMS working to alert you of any problems. And that's not just a lot of hot air.   

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com