How to Radiate Cool (Radiator Care)

There's nothing that radiates cool like a vehicle radiator that's helping to keep your engine running at the proper temperature.  You don't have to baby it, but you can't simply ignore it, either. 

Let's take a quick dive under the hood to let you know what the radiator is doing.  It takes the heat your engine produces and moves that heat outside.  It's not an easy job and heat is an engine's number one enemy.  Now that you're thinking how nice you want to be to your radiator, we have a couple of ideas how you can take care of it.

The easiest thing is to pay attention to your vehicle's temperature gauge. If it gets in the "too hot" or "not hot enough" range, have it checked out soon.  Make sure your coolant is kept at the correct level and if you see a trend that you have to add coolant more than a couple of times a year, you might have a leak.

Even if there are no obvious problems, every couple of years or so, consider taking your vehicle in for radiator maintenance.  A technician can run a pressure check for leaks and ensure that the thermostat and radiator cap are working correctly.  The technician will check that fans are running like they should so they can move air over the radiator and heat away from the coolant inside.

Ask your service advisor when you should have your radiator flushed and coolant replaced according to the manufacturer's recommended intervals.  In addition to cooling, coolant has corrosion inhibitors which stop working after a while.  Without those corrosion inhibitors, the inside of your radiator can literally start rotting away.  Keep in mind that the coolant level must be kept at manufacturer's specifications since if those corrosion-preventing chemicals aren't touching the metal, they're not preventing corrosion. 

Different vehicles use different coolants, so your service facility will make sure yours is getting the correct one.  Keep your coolant system happy and one day, maybe you can order up a custom license plate, "RAY-D-8."

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Wasteful Thinking

With the weather getting colder, you might be tempted to start your vehicle up, let it idle for 15 or 20 minutes and then get in the nice, cozy cabin.  Some vehicles offer remote starting that let you do that from the comfort of your home or apartment.  But is letting your vehicle idle like that good for it?

Manufacturers say it doesn't harm the vehicle.  They say it's because modern vehicles are made differently from those in the past.  Just about all newer vehicles employ fuel injection which uses computers to adjust the amount of gasoline that goes into the cylinders.  The engine gets only the fuel it needs, taking conditions into account.

Older vehicles, on the other hand, used to use carburetors.  When you started a cold engine, the carburetor wasn't able to adjust the gasoline amount depending on conditions.  Some of the gasoline would mix with oil and the pistons wouldn't get the same lubrication as they would with undiluted oil.

So yes, you can warm up your newer vehicle for your own personal comfort.  But consider how much fuel you are wasting.  That is not only throwing away money, it's a waste of natural resources.  And it puts more carbon into the atmosphere. 

Automakers have to be mindful of what fuel economy their vehicles can achieve.  So the flip side of the remote starts they offer is a "stop-start" feature.  When you stop your vehicle, even at a stoplight, your vehicle will turn the engine off.  When you take your foot off the brake and step on the accelerator, it starts up right away.  That feature can save as much as 10 percent of the fuel your vehicle uses. 

Your vehicle may not have that start-stop feature, but you can still save fuel by shutting off your engine manually if you are waiting somewhere, like a parking lot or perhaps sitting outside your child's school waiting to pick him or her up.  It saves you money and contributes to a healthier atmosphere for our planet.